Duplicate Up To 4 Remote Controls In Seconds!
Wireless Remote Control Duplicator is able to make a copy of any key through a few simple steps!
Duplicate your existing remote control for cars, car sunroofs, garage doors, rolling gates, heating systems, wireless anti-theft device, home automation, etc.
Don't worry about privacy and safety. It adopts one-to-one key copy technology and the password of each key is saved individually.
How to program:
- Click and Hold A and B buttons together - LED will flash 3 times
- Keep holding A button and release B button
- Keep holding A button and push B button 3 times, Led will start flashing Non-stop
- Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted!
- Put both remotes next to each other (back to back). Make sure they have direct contact.
- Click and hold 1 button on your original remote and 1 button on your clone remote.
- Keep holding until the LED light blinks 2 times then blinks 2 times then goes steady. This means the cloning has been successful.
If for some reason the clone does not go further then 2 blinks, it means the signal did not go through, please shift the remote slowly up and down until you get the point where it will go through.
- Rated voltage: 6V
- Rated current: 12mA
- Weight: 25g
- Installation: wireless
- Frequency: 315/433MHz
- Modulation method: ASK (amplitude modulation)
- Wireless distance: 50-100m (open)
- Size: 55 x 30 x 15 mm
- 1 x Wireless Remote Control Duplicator